11 Control by phone call
This function enables you to control your alarm system by phone
call. This can especially be helpful if you are located in an area
without Wi-Fi or 3G/4G coverage.
This function applies only if you are using the Alarm system with a
SIM card.
How it works
1. Call the phone number of the SIM card in the control panel.
2. The control panel picks up: type your 4-digit passcode, followed
by “#” (Default passcode: 1234).
3. A voice prompt confirms if your code is correct.
4. On your phone, dial the code corresponding to the command:
Table 1
Dial
1
0
*
3
6
9
#
Command
Arms the system
Audio monitoring
Two-way talk
Turns the siren off
Turns the siren on
Disarms the system, turns the siren off and ends the
phone call
- Disarms the system and turns the siren off
- Stops monitoring without hanging up
If your alarm is triggered
If the alarm is triggered, your control panel
will
immediately
inform you:
Summary of Contents for Smart Alarm System
Page 1: ...Curv Smart Alarm System Instructions ...
Page 2: ......
