A4306SN
4
32
190032
U-BOLT
3-5/8" x 2-1/2"
1
BRACKET
(9.2 x 6.4 cm)
33
190033
BACKING
3-1/2"
1
PLATE
(8.9 cm)
118
010118
SS HEX
5/16"
2
NUT
(.8 cm)
119
010119
SS LOCK
5/16"
2
WASHER
(.8 cm)
326
290326
DANGER
1
LABEL
405
010405
SS
4-1/2" x 2-7/16"
1
U-BOLT
(11.4 x 6.2 cm)
402
013402
SS FLAT
5/16"
2
WASHER
(.8 cm)
KEY P/N DISPLAY DESC SIZE QTY
FIGURE D
Mount the antenna to your mast using the U-bolt bracket (32) and the
hardware provided per figure D. There are two pair of U-bolt mounting
holes, one for vertical polarizaztion and one for horizontal. Tighten the
U-bolt taking care not to crush the boom. Affix warning label to the boom
as shown.
#3 - MAST MOUNT
115
050115
CONNECTOR
1
BOOT
116
240116
SILICONE
1
PACKAGE
#4 - CONNECTOR ASSEMBLY
This antenna is designed for use with 50 Ohm coaxial cable terminated with an N connector. Any length of feedline can be used with your
A4306SN. The shortest length of cable will have the least loss. A connector boot is included for use with your new antenna. Slide the boot
over the cable before attaching your N connector (figure E). Spread silicone on the outer threads of the Reddi-Match connector and N
connector. DO NOT COAT THE CENTER PIN OF THE N CONNECTOR. Attach the connector to the Reddi-Match. Apply the remaining
silicone to the outside of the connector. Slip the vinyl boot over the connector and against the connector bracket for a weather tight
connection.
KEY P/N DISPLAY DESC SIZE QTY
SILICONE GREASE
cushcraft
cushcraft
COAT WITH SILICONE GREASE
(DO NOT coat the center pin or socket!)
cushcraft
FIGURE E
1
2
3
4
5
6
EF
EE
ED
EC
EB
EA
FIGURE F
119
32
405
118
326
402
33
