27
In situations when additional traction is
necessary, rear axle lock or four-wheel
drive would be the desired choice. Some
situations may require four-wheel drive
and rear axle lock.
Drive Selection
MOD184
To select 2WD, depress the bottom of the
2WD/4WD switch. To select 4WD, move
the switch to the opposite position. To
engage the rear axle lock, push the top of
the rear axle lock switch.
The indicator will change with each
selection.
MOD339
NOTE: Maneuverability and han-
dling characteristics will differ with
the rear axle lock engaged.
Foot Brake
The foot brake is the only service brake,
and it should be applied whenever brak-
ing is needed.
Apply the brake by pressing the brake
pedal down.
Steering Wheel Tilt Latch
Pull on the lever located on the steering
column and move the steering wheel to
the desired position; then release the
lever and make sure the steering wheel
locks securely.
MOD183
Headlight Switch
MODC036
With the ignition switch in the RUN
position, use the headlight switch to
select low beam or high beam. The
taillights work in all positions except
OFF. The brake lights work in all light
positions.
Accelerator Pedal
Press down on the pedal to increase
engine RPM and vehicle speed; release
the pedal to decrease engine RPM and
vehicle speed.
Operator Seat
1. The operator’s seat is not removable
without tools.
! WARNING
Make sure the steering wheel is locked
securely in place before moving the
vehicle, or steering wheel movement
could occur causing loss of control.
Summary of Contents for Hauler 4x4 Crew Diesel 2019
Page 1: ......
Page 67: ...65 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES...
Page 68: ...66 NOTES...