MHW 0002 – DK 1693 | Version 001 – 14/09/2017 | custo med GmbH
2
[2] Resting and Stress ECG hardware, custo cardio 200 |
page 11
Resting and Stress ECG
Hardware, description of device for custo cardio 200
Switching the device on and off
The power key is required for manual operation
(without custo diagnostic software control). With the
power key the device can be switched on and off. If the
device is in standby modus, the key will light up blue.
When used with custo diagnostic the device is switched
on and off by the software.
Manual control of the suction level
With the “–” and “+” keys the suction power of the
device can be set manually. In the bar above the keys
the level of suction power (level 0 – 6) is displayed.
Automatic control of the suction level
If the suction level is adjusted manually with the
“–” and “+” keys the automatic control of the suc-
tion level of the device will be deactivated.
If automatic suction level control is enabled, the suc-
tion power of the device is set according to the pa-
tient's skin condition and the optimum suction level
is determined.
Automatic suction level control will only function if
the suction power in custo diagnostic is set at least
to level 3.
Cleaning the electrode leads
With the cleaning key the internal cleaning of the
electrode leads is activated. The process will run ac-
cording to the settings in custo diagnostic or accord-
ing to the hardware settings in the device if custo car-
dio 200 is not controlled by custo diagnostic.
The standard settings for internal cleaning
in custo diagnostic:
Blowing after test 30 seconds
Cleaning period 30 minutes
min
max
