MHW 0002 – DK 1693 | Version 001 – 14/09/2017 | custo med GmbH
2
[2] Resting and Stress ECG hardware, custo cardio 200 |
page 16
Resting and Stress ECG
Hardware, description of device for custo cardio 200
2.8
Technical data and system requirements
Technical data of custo cardio 200
Frequency response
0.05 – 500 Hz
Deviation
< 1.5 %
Time constant
3.2 sec
Sampling rate
1.0ms / 1000 Hz for extremities and chest wall
0.25ms / 4000 Hz for pacemaker
A/D converter
24 bit
Input impedance
> 50 MΩ
Amplitude quantification
0.3 µV/bit
CMRR
> 70 dB
Impedance measurement
*)
At all electrode leads (not N) with automatic quality indication
Defibrillation protection
Electrical strength 5000 V
Recovery time after defibrillation < 5 s
Suction power
Level 0 = 0 mbar
Level 1 = 60 mbar
Level 2 = 100 mbar
Level 3 = 140 mbar
Level 4 = 180 mbar
Level 5 = 220 mbar
Level 6 = 280 mbar
Power supply
15V DC – Use only the supplied power supply unit (part no. 85055)
Energy consumption
max. 25 Watt during recording
IT connection
USB (cable length 5 m) or Bluetooth
Bluetooth range
up to 10 m, depending on ambient conditions
Bluetooth frequency
2.4 GHz frequency band
Software, additional functions
Power filter
(custo diagnostic)
Muscle filter
AD filter (anti drift)
Pacemaker detection
Operating conditions
Temperature
+10°C ... +40°C
Air humidity
25 ... 95 % rH
Air pressure
700 ... 1060 hPa
Transport and storage
Temperature
-20°C ... +45°C
conditions
Air humidity
25 ... 95 % rH
Air pressure
700 ... 1060 hPa
Dimensions
Size
approx. 250 * 110 * 60 mm (L * W * H)
Weight
approx. 785 g (device without leads and electrodes)
Electrode leads
approx. 1450 mm extremities (4 pieces)
approx. 1200 mm chest wall (6 pieces)
Classification
Safety class II, Class IIa
Type BF defibrillation protected (not intracardiac)
DIN EN 60601-1
DIN EN 60601-2-25
DIN EN 60601-2-51
*) Does not apply to cardio 200 BT (Bluetooth)
