Custo Med custo cardio 400 accu, Operating Manual

MHW 0012 – DK 1713  |  Version 004 – 20/04/2020  |  custo med GmbH

2

Resting and Stress ECG

Hardware, description of device for custo cardio 400 BT and custo cardio 400 accu

[2] Resting and Stress ECG Hardware, custo cardio 400 devices | 

page 18

2.6

 Examination 

procedure

IMPORTANT

 - Prerequisite for the use of the device:

Correct installation, configuration and commissioning of the system 

by your authorised custo med dealer

Resting ECG

Make sure that the ECG device is connected to the PC

    and the power supply of the device is guaranteed.

Check that your patient is lying comfortably and is not cold.

Start custo diagnostic and click: 

    Examination, Resting ECG, New Resting ECG see 

Software description... 

.

   Spray the contact spray

1)

 on the electrode application points.

   Place the electrodes on the patient according to the placement diagram,

  See 

2.7.1 Electrode application

.

   Start the recording.

   The patient must keep still during the recording process.

Stress ECG

Make sure that the ECG device is connected to the PC

    and the power supply of the device is guaranteed.

: 

The battery charge should be > 20%

    (charge status indicator blue or green, not purple).

    Charge the device if necessary or use the mains!

When using an ergometer, make sure that the patient is in the optimal 

    seating position (the extended leg should be slightly bent).

When using a treadmill, make sure to follow the instructions 

  in 

2.7.2 Instructions for stress ECG with treadmill

. 

Start custo diagnostic and click: 

    Examination, Stress ECG, New Stress ECG 

  see 

Software description... 

.

   Spray the contact spray 

1)

 on the electrode application points.

   Place the electrodes on the patient according to the placement diagram,

  See 

2.7.1 Electrode application

.

Wait a few minutes so that the contact between the skin

    and the electrodes can develop optimally.

Apply the blood pressure cuff.

Start the recording.

1)  Contact spray warning

Before each examination, make sure to spray contact spray on the electrode 

application points. Never spray the contact spray onto the electrodes or into the 

electrodes or leads. Do not use water or contact gel!

Recommended contact sprays from: 

C+V Pharma Depot GmbH or GE Medical Systems

Only use recommended contact sprays. 

Residues from other products can damage the electrodes.