MHW 0012 – DK 1713 | Version 004 – 20/04/2020 | custo med GmbH
2
Resting and Stress ECG
Hardware, description of device for custo cardio 400 BT and custo cardio 400 accu
[2] Resting and Stress ECG Hardware, custo cardio 400 devices |
page 22
Operating conditions
Temperature
+10°C ... +40°C
Air humidity
30 ... 75 % rH
Air pressure
700 ... 1060 hPa
Transport and
Temperature
-20°C ... +45°C
Storage conditions
Air humidity
10 ... 95% rH
Air pressure
700 ... 1060 hPa
Classification
Device with external power supply,
Class IIa according to MDD,
Type CF application part
Underlying standards
DIN EN 60601-1
DIN EN 60601-1-2
DIN IEC 60601-2-25
General system requirements
Operating system
The custo diagnostic software is only suitable for installation
on Microsoft Windows systems.
custo diagnostic 5 is a client/server combination.
The custo diagnostic 5 server can only run on 64-bit systems.
For proper operation it is necessary to use the operating system/
software combinations tested and approved by custo med for
the respective custo diagnostic version
(also custo diagnostic server and client for custo diagnostic 5).
These can be obtained from the authorised custo med dealer
or directly from custo med.
PC
The PC hardware should meet the minimum requirements
of the operating system used.
Provide additional RAM (1 GB) for custo diagnostic.
Please ensure that there is sufficient free space
on the hard disk for the custo diagnostic evaluations.
The PC must meet the requirements of the safety standard
DIN EN 60950 for information technology equipment.
File sizes of the evaluations
Holter
approx. 15 MB (max. 60 MB)
ABPM:
approx. 128 KB (max. 512 KB)
Holter ABPM:
approx. 20 MB (max. 25 MB)
Resting ECG:
approx. 200 KB (for an ECG of approx. 10 sec.)
Stress ECG:
approx. 6 MB (for an ECG of approx. 20 min.)
CPET:
refer to stress ECG
Spirometry:
approx. 50 KB (max. 256 KB)
Rehab:
approx. 6 MB (for approx. 45 min. of exercise)
Hardware & ports
DVD or CD-ROM drive,
USB
port
