11
ABPM with custo screen 300 and custo diagnostic | GEB 0154 – DK 1055 | Version 002 – 05.06.2013 | custo med GmbH
Make sure that the patient does not suffer any long-term adverse effects as a
result of the short-term interruption of the blood circulation as required by the
measurement method. Ensure that the intervals between such measurements
are sufficient.
The following factors can have an effect on the results of a blood pressure
measurement: the patient's posture (whether the patient is lying down, stand-
ing or sitting), movement, the patient's physical condition, heart rate-related or
ventricular events, as well as extreme temperatures and air humidity.
Observe the operating conditions and the patient instructions.
The device is not protected against the potential effects of high frequency (HF)
surgical equipment.
Never use damaged batteries or accumulators. If custo screen 300 is not to be
used for a prolonged period of time, remove the batteries.
If liquid has been spilled on the device, remove the batteries or the accumula-
tors immediately and send the device for inspection to your authorised custo
med dealer or custo med.
Hygiene
For cleaning and disinfection observe the legal requirements and the current
state of technology.
Use only cleaning agents and disinfectants approved by custo med for clean-
ing and disinfection. Clean and disinfect your device in accordance with the
specifications given in
chapter 04 Hygiene
.
System and data security
The device must only be used with the supplied custo med software (custo
diagnostic).
As the operator you are responsible for ensuring regular data backups (patient
databases, evaluations etc.) and system backups. We recommend that you
backup the data at the latest before new installations, updates and far-reach-
ing system configurations.
custo diagnostic new installations, updates and system configurations may
only be performed by your authorised custo med dealer.
Summary of Contents for custo screen 300
Page 2: ......
