Custo Med flash 501L, Operating Manual

MHW 0007 – DK 1694  |  Version 002 – 15/07/2019  |  custo med GmbH

2

[2] Holter hardware, custo fl ash  500 / 510 / 510V / 501/ 501L  | 

page 10

Holter

 Hardware, description of device for custo flash 500 / 510 / 510V / 501 / 501L

2.6

Starting the recorder and applying it to the patient

For a recording you need: a custo flash 5xx recorder, a programmed custo multiday 

card (see 

„Part 3, Software Description“

), a freshly charged battery, a clean neck 

strap, a clean carrying case, three electrodes.

For multi-day recordings (additional material for the patient): three electrodes per 

day, one hygiene bag per day, quick guide for patients.

   Make sure that the custo multiday card is writable. If the write protection is 

active, no ECG can be saved on the SD card. To save data to the SD card, the write 

protect lock must be in the upper position as shown.

   Insert the programmed custo multiday card into the recorder. Make sure that 

the direction of insertion is correct (see the label in the recorder).

 Assemble the rechargeable battery and the recorder (press until the re-

chargeable battery engages). The direction of insertion is based on the position 

of the contacts. Once the device has been put together, it takes approx. one 

minute for the recording to start. During this period the custo multiday card 

is configured. LED display during configuration: 

2 x red

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

custo multiday card detected

green, fast

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

custo multiday card configuration

8 x red

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Configuration completed

green, slow

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recording in progress

   Put the recorder into its case. Make sure that the inspection window of the 

case is on the front of the recorder and that the LED display is visible through the 

inspection window.

Material for the

recording

Deactivating the 

custo multiday card 

write protection

Carrying case

and neck strap

Assembling and 

starting the

recorder