MHW 0007 – DK 1694 | Version 002 – 15/07/2019 | custo med GmbH
2
[2] Holter hardware, custo fl ash 500 / 510 / 510V / 501/ 501L |
page 7
Holter
Hardware, description of device for custo flash 500 / 510 / 510V / 501 / 501L
LED display
The LED display provides information on the status of the recorder, the rechargeable
battery, the custo multiday card and the recording. A table with the possible LED
display states and their meaning can be found on the next page.
Event key
This key can be pressed to mark events during the recording. The patient should
make a note of the reason for pressing this key in his recording diary – e.g. health
problems, stress, agitation or similar.
Release key (located on the rear of the recorder)
This key is used to remove the rechargeable battery from the recorder. Firmly press
the release key and pull the rechargeable battery upwards.
Note on the rechargeable battery
Always remove the rechargeable battery when the recorder is not in use.
The recorder starts as soon as the rechargeable battery is inserted.
2.4
Display and control elements on the recorder
The release key is located on the rear
of the recorder
