MHW 0007 – DK 1694 | Version 002 – 15/07/2019 | custo med GmbH
2
[2] Holter hardware, custo fl ash 500 / 510 / 510V / 501/ 501L |
page 9
Holter
Hardware, description of device for custo flash 500 / 510 / 510V / 501 / 501L
2.5
Charging the rechargeable battery, operating the charger
Notes on the rechargeable battery
It is a lithium ion battery without memory effect. The rechargeable battery can be
charged at any time, irrespective of the discharging times. A fully charged recharge-
able battery lasts for a recording of seven days.
Always use a fresh and fully charged rechargeable battery for a recording.
The rechargeable battery must only be charged at an ambient temperature between
10 – 45°C. The rechargeable battery must not be charged when exposed to direct
sunlight or on the radiator.
Charging the rechargeable battery
Connect the charger to the mains using the power supply unit
Insert the rechargeable battery into the charger as shown below
The LED display of the charger shows the state of the rechargeable battery:
The maximum charging time is approx. 4 hours
To remove the rechargeable battery, keep pressed the release key
on the rear of the charger and pull out the rechargeable battery.
Yellow LED
Green LED
Battery state
without battery
without battery
battery inserted,
charging in progress
battery inserted,
completely charged
Charger state
PSU inserted?
Ready for operation
