2
Holter ABPM
Hardware, description of device for custo screen 400
MHW 0004 – DK 1663 | Version 001 – 12/01/2018 | custo med GmbH
[2] Holter ABPM Hardware, custo screen 400 |
page 14
2.5.2
custo guard 3 ECG transmitter with a custo belt electrode belt
The ECG transmitter is fitted to the upper part of the patient's body with the custo
belt electrode belt. The skin must be free from grease and personal care products.
The electrode belt must be set up so that it fits tightly and the contact surfaces
make good contact, but that the patient is not impaired or hindered in breathing.
The contact surfaces on the inside of the electrode belt must not be soiled. Soiling
will affect the ECG quality.
CAUTION:
The electrode contact surfaces must always be in contact with the skin.
Ensure that there are no textiles between the electrode and the skin. Otherwise,
completing the ECG recording will not be possible.
Make sure that the custo guard ECG transmitter is attached properly to the snap
fastener contacts of the custo belt electrode belt:
custo guard “R” = custo belt red snap fastener
custo guard “3” = custo belt green snap fastener
custo guard “L” = custo belt yellow snap fastener
Colour coding of the custo belt
snap fastener contacts
