2
Holter ABPM
Hardware, description of device for custo screen 400
MHW 0004 – DK 1663 | Version 001 – 12/01/2018 | custo med GmbH
[2] Holter ABPM Hardware, custo screen 400 |
page 15
2.5.3
Adjusting the length of the custo belt
Opening and closing the custo belt
To open the custo belt, pull the material loop off the black plastic hook. To close the
custo belt, pull the material loop back over the black plastic hook. Then adjust the
belt length with the length adjustment to the circumference of the patient's chest.
Initial minimum length position
The length adjustment slider is located directly next to the point where the material
becomes wider on the custo belt. The elastic excess length is completely pulled
through the slider so that the slider is directly next to the black plastic hook.
Adjustment from minimum length to medium length
Hold the slider with your right hand. The upper layer of material, next to the slider on
the left, is pulled through the slider until there is no more elastic excess length. The
black plastic hook is then pulled to the left.
Adjustment from medium length to maximum length
Hold the slider or the upper layer of material next to the slider on the left with your
left hand and pull the material next to the slider on the right to the right until the
slider is situated next to the black plastic hook.
