2
Holter ABPM
Hardware, description of device for custo screen 400
MHW 0004 – DK 1663 | Version 001 – 12/01/2018 | custo med GmbH
[2] Holter ABPM Hardware, custo screen 400 |
page 17
2.5.4
Fitting the ECG transmitter with custo guard 3 ECG cable
If it is not possible to use the electrode belt, the custo guard ECG transmitter can be
fitted with the custo guard 3 ECG cable :
Firmly press the custo guard ECG transmitter onto the four contact points
of the custo guard 3 ECG cable .
Attach the neck strap to the hooks on the custo guard 3 ECG cable.
Adjust the neck strap to the desired length.
Clean the electrode contact points,
the skin must be free from grease and personal care products.
Remove the protective films from the electrodes.
Stick the electrodes to the chest, see Figure .
To prepare the electrode contact points we recommend the use of custo prep
ECG preparation cream. Rub the skin areas to which the electrodes will be
attached lightly with custo prep. We also recommend custo sensive ECG electrodes
(latex-free, PVC-free, skin-friendly, permeable to air and moisture).
L
3
R
