2
Holter ABPM
Hardware, description of device for custo screen 400
MHW 0004 – DK 1663 | Version 001 – 12/01/2018 | custo med GmbH
[2] Holter ABPM Hardware, custo screen 400 |
page 18
2.5.5
Safely using the custo screen 400 system
Use only the original memory card (custo flash card mini). Do not save any other
non-examination data on the custo flash card mini.
The parts of a custo screen 400 system (ECG transmitter, recorder, memory card)
must stay together for the whole of the examination and must not be swapped with
parts of other custo screen 400 systems. Make sure that the device and recording
data are always clearly allocated to the patient.
During the recording, the distance between the custo screen 400 recorder and the
patient must not be more than 3 metres. Therefore, the recorder should always be
carried on the body. If the recorder is taken off, this can cause gaps in the ECG
recording. Note that the ECG transmitter cannot save an ECG. The ECG is sent to the
recorder, which must be within radio range, and saved on the mini SD card there.
