Press the Menu/OK Key
Use the Up and Down Keys to scroll to ‘
DE-REGISTER
’ and press Menu/OK
Enter the pin code (Default is 0000) and press Menu/OK
Enter the handset number (1-5) that you want to remove and press Menu/OK. The unit
will go back to the De Register Menu if the removal is successful, If not, it will ask again to
enter the handset number again. Repeat to remove additional handsets or press the
Red OFF Key to exit the menu.
10.4 Base Select Manual or Automatic
If you have more than one base unit connected to one or more telephone lines you
can choose to have a particular handset fixed to one base, manually switch it to
another base or automatically switch to the base with the strongest signal. If Both
handsets are not “Selected “ to the same base you can not use the intercom or transfer
calls between them.
NOTE Before you can select an alternative base unit, the handset must be subscribed to
that base as described above in
section 10 Multiple Handsets or Bases SETUP - But in
this case connect as Base 2 or you will not be able to switch back to the “other” Base 1
If you set the handset to “
Base Select Manual”
, the handset will only choose the base
unit you have selected. When you have programmed “
Base Select Automatic
” The
handset will connect to the base with the strongest signal . The handset will only search
for the strongest base in standby mode (not during communication).
To change “
Base Select
” setting
Press Menu/OK Key
Use the Up or Down Keys to scroll to ‘
HANDSET
’ and press OK
Use the Up or Down Keys to scroll to
‘SELECT BASE’
and press OK
Use the Up or Down Keys to select to ‘
MANUAL
’ or ‘
AUTO
’
Press Menu/OK to confirm.
Once connected Press ESC to move back up the menu or the Red OFF Key to close
the menu.
10.5 Setting the Internal calls Ring Melody (for multi Handset Installations)
Press Menu/OK Key
Use the Up or Down Keys to scroll to ‘
HANDSET
’ and press Menu/OK.
Use the Up or Down Keys to scroll to ‘
RING TONE
’ and press Menu/OK.
Use the Up or Down Keys to scroll to
‘INTERNAL
’ and press Menu/OK.
using the Up or Down Keys select the melody you want, and then press Menu/OK to
save. Press ESC to move back up the menu or the Red OFF Key to close the menu.
11 Multiple Handsets and Bases - OPERATION
ONLY HANDSETS PAIRED AND SELECTED TO THE SAME BASE CAN INTERNALLY
COMMUNICATE. see previous section “
Multiple Handsets or Bases SETUP”
11.1 Internal Calling / Intercom
• In standby press the “INTERNAL”
K
ey followed (within three seconds) by the number (1-5)
of another subscribed handset.
14
