12
ACT
TM
ADDITIONAL FEATURES
Pre-Loaded Crimp Specifi cations
In addition to the ability to store up to 50 user entered dies
and 100 user entered crimp settings, the ACT
TM
Controller
has the capability of accepting pre loaded manufacturer’s
crimp specifi cations. CustomCrimp® does not maintain these
specifi cations as they are proprietary to the individual hose
and fi tting manufacturer. If, however, your ACT
TM
Controller
was pre loaded with a manufacturer’s crimp specifi cations or
if they are available to you, they are accessed in the following
manner:
•
Press the Crimp Memory Table Button.
•
Press the access button to bring up the stored crimp
specifi cations.
•
Scroll through the crimp specifi cations to select the correct
one. The right hand rocker button moves through the
crimp specs one line at a time and the left hand rocker
button moves one screen at a time.
•
When the correct crimp specifi cation is selected, press the
highlighted selection and then the Load button and select
OK to write the data to the ACT
TM
Controller.
•
This will bring up the familiar crimp screen and the crimper
can then be operated in the normal manner.
Summary of Contents for CC1200
