CC15
Service Hose Crimper
4
COMPONENT PARTS & TECHNICAL DATA
Hold / Release manual valve
Pneumatic Switch can be
used with hands or feet
The 1 HP motor delivers the
power needed to get the job
done quickly
Small Footprint for
minimum use of space
Oil level sight glass
Power Switch
Close push button
Metric Micrometer
Style Adjustment
Electrical
Enclosure
23"
16"
19"
CustomCrimp
®
QR Code
Technical Data
33 Ton
⅝” - 1 - 2 Wire
½” - 4SP
N/A - 6SP
L: 16" x W: 23" x H: 19"
Weight: 150 lbs
Power: 1HP / 110V / 1Phase (Standard)
2HP / 220V / 1Phase (Optional)
1HP / 12V / 1Phase (Optional)
1HP / 24V / 1Phase (Optionla)
Die series: K16
Adjustability: Manual / Metric
Opening w/o dies: 94mm / 3.7"
Master die travel: 27.5mm / 1.1"
Reservoir capacity: 13 Quarts
Oil type: ISO 46 Hydraulic Oil
Retraction Stop:
•
When making repetitive crimps, setting
the Retraction Stop at a point where the
hose and fitting can be conveniently
withdrawn without allowing the cylinder to
fully retract will greatly reduce the crimp
cycle times.
Back Stop:
•
When making repetitive crimps,
setting the Coupling Stop eliminates
the need to visually align the couplings
each time.
For repetitive crimps, position the hose
and fitting in the correct position and
bring the face of the coupling stop
against the fitting. Tighten the coupling
stop in the correct position.
