D105-T420 SERIES
Service Hose Crimpers
14
Step 2:
Place the
Lubricated Die Set
squarely in the cone base.
Note:
Make sure the split of the die cages is facing the operator.
(as shown).
Step 6:
Place the
Lubricated Notched
Pressure Plate
over the die set.
Note:
The notched pressure plate
MUST
be covering
all 8 die fi ngers as shown.
Step 5:
Align the
90 degree fi tting
in the die set according to the hose
and fi tting manufacturer’s recommendation.
Note:
Compress the die set by hand to hold the hose and fi tting in place.
CRIMPING WITH
NOTCHED
T420 PRESSURE PLATE
