Operating instructions Multi-cell compressor RKL 160
Safety
12
Hazard notes and occupational safety
For your own safety and that of the machine, the following
information must be observed and complied with:
Improper operation
DANGER!
Danger due to improper operation!
– Only use RKL 160 in a perfect technical
condition. Malfunctions that are relevant for
safety have to be promptly eliminated.
– Conversions of the RKL 160 are not permissible
and can impair safety.
– Never bridge any safety equipment or put it out
of operation.
– Any work on the RKL 160 and/or on electrical
equipment must be carried out by specialised
staff.
– Repair and maintenance work may only be
carried out when the RKL 160 is stationary.
For this, the RKL 160 must be secured against
restarting!
– The RKL 160 may not be under pressure or in a
state of vacuum while work is being carried out
on it.
Close shut-off valve on the vehicle side and
vent the pipe between RKL 160 and shut-off
valve or manually relieve excess pressure at
safety valve. Observe pressure gauge!
– The drive's protective equipment may only be
removed when the RKL 160 is stationary and
has to be correctly refitted after completion of
work.
– Only dismantle accidental contact protection
after RKL 160 and pipe has cooled down.
– It is an environmental protection requirement
that any liquids arising during maintenance work
(e.g. oil) must be collected and disposed of in
an environmentally compatible manner.
Summary of Contents for RKL 160
Page 29: ...Operating instructions Multi cell compressor RKL 160 Index 29...
Page 30: ......
Page 31: ......
Page 32: ......
