Operating instructions Multi-cell compressor RKL 160
Maintenance
23
7 Maintenance
7.1 Safety during maintenance work
See chapter 2.6 "Occupational safety and special risks".
Personal protective equipment
The following must be worn during all maintenance work:
Safety working clothing
Protective gloves
Safety shoes
Safety goggles
7.2 Maintenance schedule
The following describes the maintenance work that is necessary for
an optimum, trouble-free operation. Maintenance intervals must be
observed.
If increased wear of individual components or functional groups is
determined during regular inspections, the operator has to reduce
the required maintenance intervals on the basis of the actual signs
of wear.
Changes compared to normal operation (increased power
consumption, temperatures, vibrations, noises, etc. or response of
monitoring systems) lead to the assumption that the functions are
impaired. These then have to be subjected to an inspection by
specialised staff.
In case of queries regarding the maintenance work and intervals:
contact the manufacturer (service address
page 2).
For maintenance schedule refer to next page.
Maintenance schedule
Interval
Maintenance work
To be carried out by
Weekly
Check the retaining screws
1)
(see Chapter 6.4).
Operator
Clean RKL 160 (see chap. 7.3).
Check and clean cooling air guidance (refer to chapter 7.3).
Check air filter's degree of soiling
(refer to chapter 7.3)
Check air filter hose for leaks.
Check connection to drive (articulated shaft, coupling)
1)
.
Check screw connections.
quarterly
Check height wear of pipe slider (refer to chapter 6.4).
Specialised staff
Check non-return valve (refer to chapter 6.4).
1) Observe manufacturer's recommendations
Tab. 4: Maintenance schedule
Summary of Contents for RKL 160
Page 29: ...Operating instructions Multi cell compressor RKL 160 Index 29...
Page 30: ......
Page 31: ......
Page 32: ......
