11
12
In point-to-point mode, the video source is sent to the transmitter via HDMI or SDI.
The receiver will transmits the video signal to display device via ethernet cable
HDMI/SDI
Point-to-point mode
Camera
Receiver
Transmitter
Monitor
Switch Console
RTSP
Live Streaming network
Live Streaming network
1000m/3280ft
Power the Devices
Power the transmitter and receiver with AC adapter or battery.
The receiver’s OLED screen will display “connecting to transmitter” before
the wireless connection is built .
The receiver’s OLED screen will display “ link up with transmitter.
Please check video source” once the connection between the transmitter
and the receiver is built successfully. Video appears on the monitor within
a few seconds.
Application Mode
HDMI/SDI