EAGLE 3000 Moving Head User Manual
17
Figure
Figure
Figure
Figure 8
8
8
8
WARNING:
WARNING:
WARNING:
WARNING:
Backcap and adjustment knobs will be HOT during lamp operation. Wear gloves to
prevent burns.
To
To
To
To align
align
align
align lamp
lamp
lamp
lamp::::
1
、
Power-up luminaire.
2
、
At Menu Display, set intensity to 100%, open beam size iris and focus for hard edge.
3
、
Position beam on a white wall at a distance of 10 to 20 feet.
4
、
At backcap, use cross screwdriver adjust screws, adjust beam as required
GOBO
GOBO
GOBO
GOBO REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
WARNING:
WARNING:
WARNING:
WARNING:
Remove power from luminaire before performing maintenance. Gobos may be HOT after
operation. Allow to cool before replacing.
To
To
To
To replace
replace
replace
replace a
a
a
a gobo:
gobo:
gobo:
gobo:
1
、
Remove power from luminaire.
2
、
Remove appropriate head cover by loosening four screws
3
、
Rotate gobo wheel until required gobo position is accessible.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Do not push on gobo glass. Press on gobo carrier only.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing Clean with glass cleaner and soft cloth if required.
4
、
Remove current gobo by carefully pressing on edges of gobo carrier with fingers, pressing gobo
toward front end of luminaire (toward lens), and out of wheel.
5
、
Install new gobo as follows:
A.
Align three tabs on gobo carrier with three notches in wheel (gobo can only be oriented in one
direction).
B.
Insert gobo carrier into wheel, ensuring that carrier snaps into place.
6
、
Close fan duct assembly and replace covers.
COLOR
COLOR
COLOR
COLOR FILTER
FILTER
FILTER
FILTER REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
WARNING:
WARNING:
WARNING:
WARNING:
Remove power from luminaire before performing maintenance. Filters may be HOT after
operation. Allow to cool before replacing.
To
To
To
To replace
replace
replace
replace a
a
a
a color
color
color
color filter:
filter:
filter:
filter:
1
、
Remove power from luminaire.
2
、
Remove top head cover by loosening four screws
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Do not touch filters with bare fingers. Wear cotton gloves or other covering while replacing.
Clean with glass cleaner and soft cloth if required.
