EAGLE 3000 Moving Head User Manual
8
Launch the luminaire. Press button ENTER panel. Press button UP or DOWN if you want to browse through
the various Setup Options. If you turn the coder knob clockwise, the function like as button UP . On the
contrary, the function like as button DOWN.
Press button ENTER to save your settings or enter the next menu. There is same function if you push the
coder knob. Press button UP or DOWN to shift.
Press button ESC, it will return to the upper menu one by one. If you stay for minutes defaulted will show
display status automatically. (Details in Chapter Three)
PROGRAM
PROGRAM
PROGRAM
PROGRAM START
START
START
STARTING
ING
ING
ING ADDRESS
ADDRESS
ADDRESS
ADDRESS
Each EAGLE 3000 must be given a DMX start address so that the correct luminaire responds to the correct
control signals. This DMX start address is the channel number from which the luminaire starts to “listen” to
the digital control information being sent out from the controller.
The EAGLE 3000 Strengthen has 28 DMX channels. For example standard mode has 28 channels, so set
the No. 1 Luminaire’s address 001, No. 2 Luminaire’s address 029, No. 3 Luminaire’s address 057, No. 4
Luminaire’s address 085, and so on.
Launch the luminaire. Press button ENTER or coder knob to panel.
Press button ENTER to show you DMX address.
Press button UP and DOWN, you can set the address; Press button ENTER to confirm; In the same time, the
setting has been enabled and saved.
Press button ESC, it will return to the upper menu one by one.
