TOPSIDE FUNCTIONS
JETS
Press the “Jets” button once to activate the low speed of the pump and again
for the high speed. Press the “Jets” button again to turn off the pump. If
left running, the low speed of the pump will automatically turn off
after 4
hours
, and the high speed will automatically turn off
after 15 minutes
.
LIGHT
Press the “Light” button to turn the light on and off. If left on, the light
automatically turns off
after 4 hours
. In spas equipped with LED light,
press the light button consecutively to change the color sequencing.
MODE
The mode is changed by pressing the “Temp” button, then pressing the
“Light” button.
Standard Mode
is programmed to maintain the desired temperature. Note
that the last measured spa temperature displayed is current only when the
pump has been running for at least 2 minutes. “
St
” will be displayed
momentarily when you switch into Standard mode.
Economy Mode
heats the spa to the set temperature only during filter
cycles. “
Ec
” will display solid when temperature is not current, and will
alternate with temperature when temperature is current.
Sleep Mode
heats the spa to within 20°F/10°C of the set temperature only
during filter cycles. “
SL
” will display solid when temperature is not current,
and will alternate with temperature when temperature is current.
Preset Filter Cycles
. The first filter cycle begins 6 minutes after the spa is
energized. The second filter cycle begins 12 hours later. Filter duration is
programmable for 2, 4, 6, 8 or (12 hours continuous filtration, indicated by
“
FC
”). The default filter time is 2 hours. To program, press “Temp,” then
“Jets.” Press “Temp” to adjust. Press “Jets” to exit programming.
11
