TURBO/WHIRLPOOL JET (102 pnpX & 103 only)
The Turbo jet is located on the filter cavity wall is the
Turbo jet. This jet is a combination valve and
high capacity jet. To turn the Turbo jet on,
simply turn the face counter-clockwise to the
first stop position. To turn the Turbo jet off,
turn the face clockwise to bring the main jets
back to full power.*
* Due to the substantial amount of water pressure
when the Turbo Jet is operating, you must turn the
pump to the off or low speed cycle position before attempting to rotate the
jet face.
AIR CONTROLS
Air controls are adjusted by rotating the topside dial. These controls serve
to regulate the amount of air mixed with water when the whirlpool or
hydrotherapy jets are operating in the
high pump mode
.
16
101 pnp, 102 pnpX & 103
Supreme pnp,
Supreme pnpX,
Supreme,
Supreme X
(See illustration on page 14)