ELECTRICAL REQUIREMENTS
NOTE: Name badge on rub rail indicates equipment location
15 amp GFCI Rating
101 pnp, 102 pnpX, Supreme pnp, Supreme pnpX
50 amp GFCI Rating
103, Supreme pnp, Supreme pnpX
• Your 110-volt or 220-volt spa pack is designed to be “PERMANENTLY
CONNECTED”.
•
It is the customer’s responsibility to acquire necessary
permits and to arrange for installation and hook up of
the electrical power.
Plug & Play Cord Location
For square plug and play spas, the GFCI cord can be accessed through
the notched corner knockout as shown to the right. You may have to
remove the equipment access panel and route the cord through the open-
ing.
For the round Viking 1P or 2P spas, you
will need to remove the panel with the cord
cutout in the lower left hand section of the
panel to access the GFCI cord. Attach the
panel back onto the spa with the cord routed
through the notch section of the panel.
5
Notched Corner where
cord is located on square
plug and play spas