background image

31/38

S

ept

.

 

2014  

V3.1

CybTouch 12 PS User Manual

M

akinG

 

a

 

bend

 

on

 

The

 e

aSy

b

end

 p

aGe

e

aSy

b

end

 P

aGe

The EasyBend page is used for individual bends, for example when an external worker 
needs to interrupt production just to make a single bend (usually with the same tools).

The program currently being used for production is only temporarily interrupted 
(no need to save it) when switching to the EasyBend page, and then resumed 
again when returning to the program page (

Menu Button

 

 Current program).

(

Menu Button

 EasyBend

See 

Basic Page Description, page 14

 for more information on the different 

controls on the EasyBend page.

S

etting

 i

nStructionS

:

1.  Touch the material’s name (here 

Steel

). The 

More Page (see page 14)

 is displayed. 

Select the 

Material (see page 15)

 used, enter the 

Material thickness

 and the 

Bending length

.

2.  Touch one of the tool’s icon (

 or 

) to select a punch or die. To learn how to 

configure tools, please refer to section 

Tools Management, page 18

.

3.  Enter the angle 

 for the first bend you wish to create (here 

90°

).

4.  Enter the flange’s length 

 (here 

100.00 mm

).

5.  Enter the back gauge height value 

 (here 

34.00 mm

)

6.  Press this button 

 to go to the 

More Page (see page 14)

 and enter the 

eventually required extra data for the bend.

7.  Start the hydraulic pump motor (by pressing this button 

 if available. It turns red 

when the motor is running the button becomes red).

8.  Press the 

 button to position the machine according to the data that were just 

entered.

9.  When the machine is ready to bend, a 

 button is displayed.

10.  Press the foot switch to execute the bend.

Summary of Contents for CybTouch 12















































Reviews: