32/38
S
ept
.
2014
V3.1
Interactive
message line
Message number
CybTouch 12 PS User Manual
e
rror
and
w
arninG
M
eSSaGeS
Following is a list of warning and error
messages which may be displayed on the
interactive message line of the CybTouch.
There are two types of messages:
•
, which are displayed
on a green background. They are
information or instructions that will
disappear automatically.
•
errors), which are displayed on a red
background. They inform the user of an
error occurring on the machine or NC,
and sometimes require intervention by
the end user or a technician.
W
arninG
M
eSSaGeS
M
SG
n
r
.
M
eSSaGe
d
eScripTion
W01
Not implemented
This message is displayed when a function is in development but
not yet fully implemented.
W02
Ignore
This message appears when the desired action makes no sense,
like for example clearing the indexation when the indexation was
not made.
W03
Code accepted
This message is displayed when the correct password has been
entered.
W04
Please press 2 seconds
This message reminds the operator to keep the start pump
button
pressed for 2 seconds.
W05
The pump is on
This message appears after the pump starting cycle has been
correctly executed.
W06
The pump is off
This message indicates that the pump has been stopped.
W07
Select at least one bend
This message is displayed when the operator tries to go to the
Bend 2D screen from the Bend Order screen before defining
the first bend of the sequence (see
W08
Touch OK to continue
Indicates that a validation is required to continue.
W09
Step n°
This message appears in the
indicates the step sequence number when browsing through the
program’s steps.
W10
Cycle in progress
While this message is displayed, the machine cycle is in progress
and the screen is locked, except for the Stop button.
W11
Machine is indexed
Indicates the indexation cycle was successful.
W12
Identification OK
In the Axis Wizard, indicates the identification cycle was
successful.
When reporting error messages, please ALWAYS indicate the error number at
the end of the line. This number also refers to the first column in the section
below.