v2.4c
03.04.12
CybTouch6_Shear_Usermanual_v2.4c_TK
page 3 of 18
G
ETTING
S
TARTED
G
ENERAL
I
NTRODUCTION
This user manual is for the CybTouch 6 W (swing shear)
– G adjustable rake angle
(shear) numerical control (Dec. 2011).
Due to software evolutions and the shear controlled by the CybTouch
(configuration/capabilities), the present manual may not fully correspond to the
CybTouch that you currently have. However, differences are only minor.
Do not use sharp and/or pointed objects (sheet metal, screwdriver, metal pen ball, etc)
to touch the screen; only use your fingers (with or without gloves on) or a plastic pen.
Make sure that your gloves do not have metal particles incrusted in the finger tips as
they may also damage the screen.
Take a few minutes to practice pressing gently on the screen, you will find that the
screen is very reactive and it is pleasant to use.
Screen Cleaning
To clean the screen while the CybTiouch is on, touch the
button.
Use only a damp and soft cloth with soap or a neutral detergent.
NEVER use solvent, petrol, benzene, alcohols, etc
‼
S
ELECTING YOUR
L
ANGUAGE
To choose your language, please follow the below steps:
1. Touch the
Menu
button
.
2. Touch
Other menus
.
3. Touch
User preference
.
4. Touch
Language
and select your language in the list.
Touchscreens are pressure sensitive.
Do not press down hard on the screen
.
Pressing on the screen hard will damage the
display. Such damage is not covered by
manufacturer warranty!
