v2.4c
03.04.12
CybTouch6_Shear_Usermanual_v2.4c_TK
page 9 of 18
E
XTRA
C
UTTING
F
EATURES
There are various other features to help the operator to perform tasks.
These features can be used in both in EasyCut mode or for programs.
The below table regroups and describes all buttons and features available on the
CybTouch 6:
*
Functions with an asterisk (*) are not available on all machines, depending on the
CybTouch version and the machine type.
Icon / Button
Description
Pump Off*
The pump is off, to turn it on touch this button for 2 seconds, it will
become red.
Pump On*
The pump is on, to turn it off touch this button for 2 seconds, it will
become green.
Clean Screen
Touching the
Clean Screen
button deactivates the screen for 8
seconds, giving the operator time to clean the screen with a damp
cloth with neutral soap or detergent.
Menu
Touching the
Menu
button in EasyCut page opens the program
menu.
Touching the
Menu
button in the program page allows the operator
to access the EasyCut page and the other menu pages.
Material thickness
Touching the
Material thickness
button or icon allows the user to
enter the thickness of the material.
Next page
The operator can use this button to go to the next page in a program
or menu.
Previous page
The operator can use this button to go to the previous page in a
program or menu.
Sequence
Only available in program mode. By touching this button, the operator
can insert a sequence after the selected sequence in a program (or
delete the selected sequence). The small number next to this button
displays the total number of sequences in the program.
Back gauge
The
Back gauge
icon is active; pressing the back gauge value
below the icon allows the operator to change the back gauge position.
Touching this icon will hide the back gauge value and park the back
gauge at the end of the machine, for cuts which do not require a back
gauge.
