background image

37/38

CybTouch 8 P User Manual

S

ep

.

 

2019  

V2.1

M

SG

 n

r

.

M

eSSaGe

d

eScripTion

E67

Fw Axes Error 39 [Speed 
tracking error]

This is a regulator error. The axis could not follow its trajectory. 
It may be due to higher friction, resistance or an obstacle on the 
axis movement. It may also be a drive problem. 
Call a technician.

E68

Fw Axes Error 316 [MinPosition 
or MaxPosition outside limit ! ]

Axis position counter is out of max or min limit.
Verify physical axis position and set the axis counter accordingly.

E69

“Downward command” digital 
input not configured

While configuring (setting up) the NC, dedicated input or output 
are not configured but are requested to run properly.

E70

Progr. angle is smaller than the 
die angle

The programmed angle is smaller than the die angle. Change die.

E71

Progr. angle is smaller than the 
punch angle

The programmed angle is smaller than the punch angle. Change 
punch.

E72

Depth safety

The calculated angle causes the punch, material, and die to 
collide and approach coining mode. Operator must confirm to 
proceed.

E73

“Comm. HS-LS beam” digital 
input not configured

While configuring (setting up) the NC, dedicated input or output 
are not configured but are requested to run properly.

E74

“Beam” encoder not 
configured

This message is displayed on PL types of machine, where the 
“Beam” encoder must be configured.

E75

Next program error

This message appears when there has been a problem with the 

Next-Part Function (see page 27)

. It can be either a problem 

while changing mode, that the next part doesn't exist, or could 
not be read.

Summary of Contents for CybTouch 8 P













































Reviews: