PAGE 24
USER GUIDE DNC 60 GS
PRODUCT
PAGE
Key
.
PRODUCT 0 N 1 STOPPED
NEXT PRODUCT ___
CODE
Acceleration Factor X3 __%
SHEET: Length Width Thickness
Untreated _____.__ _____.__ 2.00
Material ALU1 Sigma 30 Kg/mm²
NEXT PRODUCT
This field allows the products chaining.
CODE
Code number for the current product.
Acceleration factor X3
Same with X3 (backgauge or dependant
auxiliary axis).
SHEET
Length Width
Geometrical dimensions of the sheet. (They
may be used for calculating clean cut cycles).
Thickness
This field intervenes in the calculation of the
blade gap, rake angle and possibly the blade
disengagement TDC functions. (Figure 3)
Untreated
The corresponding dimensions of the sheet
before being loaded into the machine.
Material
This field determines the blade gap calculation
constant (programmed machine parameters)
according to the material used.This field is only
displayed if the machine has a "blade gap"
function.
The material selection is made with the manual
keys.
Sigma
Material hardness. This field also intervenes in
the calculation of the blade and rake angle
functions.
Summary of Contents for DNC 60 GS
