Cyber Console IC-1704, User Manual

- 6 - 

CONFIGURATION 

IC-1704 Front View 

IC-1708 Front View 

IC-1716 Front View 

1. Port Selection Switches 

   Press the push button to directly switch to the corresponding PC.   

      • In the cascade architecture, if the port is connected to KVM but not PC, then the push button 

will not respond.   

      • Simultaneously press Push Buttons 1 and 2 to directly enter the OSD Control Mode. 

      • Simultaneously press Push Buttons 3 and 4 (IC-1704), Push Buttons 7 and 8 (IC-1708), Push 

Buttons 15 and 16 (IC-1716) to open “Console-Reconfirmed”, and the keyboard and mouse 

will be reconnected, and the EDID in the screen will be read again.   

2. Port LEDs 

   These Port LEDs are built in the Port Selection Switches. 

Online: A green light indicates that the PC or KVM connected to the corresponding port is on 

and operating.   

    Selected: A red light indicates the situation of being connected to the port. 

•

If a port is connected to KVM, then the red light of that port will not on.   

•

Besides the special mode, the whole system architecture only has one red light (indicating that 

the Console is connecting to the PC) or has no red light (when powering on the KVM for the 

first time.) 

3. Power LED