Cyber Console IC-1704, User Manual

- 9 - 

power of the KVM is turned off), we recommend you to reinstall the whole system.   

   Note: 

It is noteworthy that there are two levels available.   

•

Expansion 

1

、

PCs 

It is not necessary to power down the KVM or other computer connected to the KVM system.  

You only need to power off the desired PC and connect the PC to the CPU port of the KVM in 

parallel by the 3-in-1 cable, and then power on the PC.   

2

、

Slave KVM 

Make sure the power switch at the rear panel of the KVM is OFF.  Use the AC power cord 

(3-in-1 cable) to connect the console port of the slave KVM to the CPU port of the master KVM.  

Power on the slave KVM. 

For example:   

If you want to install one  Slave KVM and three  PCs, then just follow Step 2 of the foregoing 

method to add the slave KVM and install the PCs one by one according to Step 1.   

OPERATION 

Port Selection 

The LCD KVM provides fours switching methods: Manual Key, Hot Key, Mouse Clicking and 

OSD. 

Man

•

ual Key 

  It is the simplest switching method.  You just need to press the Port Selection Switch on the 

front panel of the KVM.  The Selection LED (Red) is on, indicating that you are switching to 

the corresponding port. 

  Note: