Copyright © 2016 CyberPower Systems, Inc.
HARDWARE INSTALLATION
3
Step 4: Adjust rackmount rails to fit your rack
Adjust the rail depth to match your rack depth. Attach the rackmount rail
to your rack with two screws and two plastic washers at the front of the
rack. (Located in position 1 & position 4) Tighten the M5X6L screws on
the front bracket. Secure the rail to the rear of the rack with two M5X6L
screws and two plastic washers.
Step 5: Place and secure the
Battery pack
on the rails
Slide the hanging brackets on the Battery pack into the rails mounted in
the rack with the front of the unit facing toward you. Secure the Battery
pack to your rack with four M5X12L*4pcs screws at the front of the rack.
(Located in position 2 & position 5)
How to Slide out Battery pack from rail
The Battery pack will be secured by a safety locking mechanism midway
of pulling it out of the rack. Use both hands to hold the Battery pack and
press the safety locking tab to pull the Battery pack out.