background image

 

1 IMPORTANT SAFETY INSTRUCTIONS 

(SAVE THESE INSTRUCTIONS) 

 

Before attempting to unpack, install, or operate the product, please read and follow all instructions 

carefully. 

CAUTION! 

To prevent the risk of fire or electric shock, install in a temperature and humidity controlled 

indoor area free of conductive contaminants. 

(Please see 

Technical Specifications

 section for 

acceptable temperature and humidity range.) 

CAUTION! 

The product must be installed in a protected environment away from heat-emitting 

appliances such as a radiator or heat register. The location should provide adequate air flow around the 

product for proper ventilation.

 

CAUTION! 

To reduce the risk of injury, use cables come with the product. Use appropriate and certified 

external battery cables.

 

CAUTION!

 To reduce risk of damage and injury, use batteries with good quality. 

CAUTION!

 Risk of electric shock. 

DO NOT

 remove the cover. No user serviceable parts inside.

 

CAUTION! 

Provide adequate ventilation for the battery compartment. The battery enclosure should be 

designed to prevent accumulation and concentration of hydrogen gas at the top of the compartment. 

CAUTION!

 A battery can present a risk of electrical shock and high short circuit current. When working 

on batteries, remove watches, rings, or other metal objects. Use tools with insulated handles. 

CAUTION!

 Hazardous live parts inside can be energized by the battery even when the AC input power 

is disconnected. 

CAUTION!

 To avoid electrical shock, turn off the unit and unplug it from the AC power source before 

installing equipment or servicing the battery. Servicing the battery can only be performed by trained 

personnel.

 

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!

 Do not use in any circumstance that 

would affect the operation and safety of life support equipment, medical applications, or patient care. 

DO NOT USE WITH OR NEAR AQUARIUMS!

 To reduce the risk of fire or electric shock, do not use 

with or near an aquarium. Condensation from the aquarium can cause the unit to short out. 

DO NOT USE THE PRODUCT ON ANY TRANSPORTATION!

 To reduce the risk of fire or electric 

shock, do not use the unit on any transportation such as airplanes or ships. The effect of shock or 

vibration caused during transit and the damp environment can cause the unit to short out. 

 

 

 

 

 

 

 

Summary of Contents for CPD1200EO12LCD


























Reviews: