2.5 Operation Warnings
2.6 Symbols on the Unit
Symbol
Explanation
Don’t dispose of the product together with the household waste. In
accordance with the applicable disposal regulations for electronic waste.
Notice
Install and operate the product must follow the manual and instruction,
incorrect installation or operation may damage the product.
Danger to life due to high voltage
There high voltage inside the product, don’t open the enclosure or touch
the live parts.
Risk of burns
The product’s surfaces are hot during operation. Don’t touch during
operation.
Observe the documentation
Observe all documentation supplied with product
Danger to life due to high voltage
Prior to performing any work on the product, always disconnect it from
all sources and wait for 5 minutes.
Ensure all covers and doors are closed and secure during operation.
Although designed to meet all safety requirements, some parts and
surfaces of Unit are still hot during operation. To reduce the risk of
injury, do not touch the surfaces while Unit is operating.
Incorrect sizing of the PV plant may result in voltages being present
which could destroy the unit.
Anytime the unit has been disconnected from the power network, use
extreme caution as some components can retain charge sufficient to
create a shock hazard; to minimize occurrence of such conditions,
comply with all corresponding safety symbols and markings present on
the unit and in this manual.
In special cases, there may still be interference for the specified
application area despite maintaining standardized emission limit values
(e.g. when sensitive equipment is located at the setup location or when
the setup location is near radio or television receivers).In this case, the
operator is obliged to take proper action to rectify the situation.
WARNING
!
CAUTION
!
User Manual
4 Hybrid CPSHB300ETR-IN
Summary of Contents for CPSHB300ETR-IN
