Copyright © 2012 Cyber
Power Systems, Inc.
INSTALLING/REMOVING THE RETENTION CLIP
5
INSTALLING THE RETENTION CLIP
Step 1: Cable Tie Installation
Insert the Cable Tie into the hole beside the socket on the MBP. Note the
flat side of the Cable Tie should face to the socket which the power cord
will be inserted.
Step 2: Retention Clip Installation
Place a Retention Clip on the power cord. Insert the power cord to the
MBP. Align and Insert the Cable Tie into the Retention Clip.
Step 3: Fasten Retention Clip
Push the Retention Clip until it touches the plug and fasten the Retention
Clip.
REMOVING THE RETENTION CLIP
Step 1: Loosen Retention Clip
Loosen the Retention Clip by pushing it to the right.
Step 2: Remove Retention Clip
Remove the Retention Clip by pulling the Cable Tie to the right.
Flat side