įĂĀĂĀƫ5!.ƫ+3!.ƫ5/0!)/ƫĨĩČƫ *ċƫ((ƫ.%#$0/ƫ.!/!.2! ċƫ((ƫ+0$!.ƫ0. !).'/ƫ.!ƫ0$!ƫ,.+,!.05ƫ+"ƫ0$!%.ƫ.!/,!0%2!ƫ+3*!./ċƫ
4
OVERVIEW
POWER MODULE
13
5 6
7
8
9
11
10
12
1.
Power Button / Power on Indicator
Master ON/OFF for the UPS. Indicates that the UPS is on and supplying power.
2.
UPS Status / Fault / Replace Battery LED Indicator
Indicates the status of the UPS whether is operating in Line, Battery or Bypass Mode, or the UPS has an
internal fault or the battery needs to be replaced.
3.
Multifunction LCD Readout
Shows UPS status, information, settings and events.
4.
Function Buttons
Scroll up, scroll down, Enter and Escape.
5.
USB port
This is a connectivity port which allows communication and control between the UPS and the connected
computer. It is recommended to install the PowerPanel® Business Edition Agent software on the PC/Server
connected with the USB cable.
6.
Serial Port
Serial port provides communication between the UPS and the computer. The UPS can control the
computer’s shutdown during a power outage through the connection while the computer can monitor the
UPS and alter its various programmable parameters.
7.
Surge Protected Communication Ports RJ-45/RJ-11
These ports are used to protect standard RJ-45/RJ-11 based products (ADSL, LAN, Phone/ Modem-Lines)
and cabling systems from surges.
8.
Relay Output Connector
Convert UPS signals into relay potential-free Dry Contacts for industrial control.
9.
Expansion slot
Remote management card is pre-installed in expansion slot.
10.
Backfeed Protection Connector
Prevents power feedback from the inverter to utility power in case of power failure and a fault in the bypass
circuit.
OL6KPMB/OL8KPMB/
OL10KPMB
%$77(5<
)$8/7
%<3$66
21/,1(%$77(5<
5(3/$&(
21
(17(5
(6&
4
1
3
2
