1
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important instructions. Please read and follow all instructions
carefully during installation and operation of the unit. Read this manual thoroughly before
attempting to unpack, install, or operate the UPS.
CAUTION!
The UPS must be connected to a grounded AC power outlet with fuse or circuit
breaker protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to
power-drain this equipment, turn off and unplug the unit.
CAUTION!
The battery can power hazardous components inside the unit, even when the AC
input power is disconnected.
CAUTION!
The UPS should be placed near the connected equipment and easily accessible.
CAUTION!
To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area, free of conductive contaminants. (Please see specifications for
acceptable temperature and humidity range).
CAUTION! (No User Serviceable Parts):
Risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION! (Non-Isolated Battery Supply):
Risk of electric shock, battery circuit is not
isolated from AC power source; hazardous voltage may exist between battery terminals and
ground. Test before touching.
CAUTION!
To reduce the risk of fire, connect the UPS to a branch circuit with 10 amperes (1000
/ 1500 / 2000) / 16 amperes (3000) maximum over-current protection in accordance to CE
requirement.
CAUTION!
The AC outlet where the UPS is connected should be close to the unit and easily
accessible.
CAUTION!
Please use only VDE-tested, CE-marked mains cable, (e.g. the mains cable of your
equipment), to connect the UPS to the AC outlet.
CAUTION!
Please use only VDE-tested, CE-marked power cables to connect any equipment
to the UPS.
CAUTION!
When installing the equipment, ensure that the sum of the leakage current of the
UPS and the connected equipment does not exceed 3.5mA.
CAUTION!
The 1000 / 1500 / 2000 / 3000 / Battery module models are only qualified
maintenance personnel may carry out installations.
CAUTION!
Do not unplug the unit from AC Power during operation, as this will invalidate the
protective ground insulation.
CAUTION!
To avoid electric shock, turn off and unplug the unit before installing the input/
output power cord with a ground wire. Connect the ground wire prior to connecting the line
wires!
CAUTION!
Do not use an improper size power cord as it may cause damage to your
equipment and cause fire hazards.
CAUTION!
Wiring must be performed by qualified personnel.