CyberSuite™ LED Keypad User Manual
19
To fast force arm your system press and hold the force
key for two seconds. This option MUST be enabled by
your property manager or installation company. Refer to the
system configuration table on page 25.
BYPASSING ZONES
Bypassing zones allows you to program the alarm system to
ignore (deactivate) specified zones the next time the
system is armed. For example, you may wish to bypass
certain zones when workers are renovating part of your
establishment. Once the system is disarmed, the bypass
settings are erased.
Bypassing Zones
To select zone(s) to be bypassed, first enter:
, [USER CODE]
The BYPASS LED will now turn on and you can toggle
bypass mode on any zone by pressing the number
corresponding to the required zone. The zone LED will be lit
for each bypassed zone.
Press the enter key to store the bypass settings and
exit., or press the clear key to exit without making
changes.
Bypass Zone Recall
After disarming the system, the bypass entries are erased.
The Bypass Recall Feature reinstates the previous bypass
entries saved in memory. This eliminates the need to
manually re-program the bypass entries every time you arm
the system if you are always bypassing the same zone(s).
Summary of Contents for LED Keypad
Page 1: ...LED Keypad User Manual ...
Page 2: ......