Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
14
2.2.6 Announcing the IP Address
To announce an Office Ringer’s current IP address, press and hold the RTFM switch for one to two
seconds.
Note
The Office Ringer will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Note
Pressing and holding the RTFM switch for longer than five seconds will restore the Office
Ringer to the factory default settings.
Figure 2-8. RTFM Switch