Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
16
2.3 Configure the Office Ringer Parameters
To configure the Office Ringer online, use a standard web browser.
Configure each Office Ringer and verify its operation
before
you mount it. When you are ready to
mount an Office Ringer, refer to
Section A.1, "Mount the Office Ringer"
for instructions.
All Office Ringers are initially configured with the following default IP settings:
When configuring more than one Office Ringer, attach the Office Ringers to the network and
configure one at a time to avoid IP address conflicts.
Table 2-4. Factory Default Settings
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1