Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
20
3. On the
Home Page
, review the setup details and navigation buttons described in
.
Table 2-6. Home Page Overview
Web Page Item
Description
Device Settings
Device Name
Shows the device name.
Change Username
Type in this field to change the username.
Change Password
Type in this field to change the password.
Re-enter Password
Type the password again in this field to confirm the new password.
Current Settings
Serial Number
Shows the device serial number.
Mac Address
Shows the device Mac address.
Firmware Version
Shows the current firmware version.
IP Addressing
Shows the current IP addressing setting (
DHCP
or
static
).
IP Address
Shows the current IP address.
Subnet Mask
Shows the current subnet mask address.
Default Gateway
Shows the current default gateway address.
DNS Server 1
Shows the current DNS Server 1 address.
DNS Server 2
Shows the current DNS Server 2 address.
Speaker Volume
Shows the current speaker volume level.
SIP Mode is
Shows the current status of the SIP mode.
Multicast Mode is
Shows the current status of the Multicast mode.
Event Reporting is
Shows the current status of the Event Reporting mode.
Officeringer is
Shows the current status of the Officeringer mode.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.