Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
24
2. On the
Network Configuration
page, enter values for the parameters indicated in
3. After changing the parameters, click
Save Settings
. This updates the changed parameters and
reboots the Office Ringer if appropriate.
4. Connect the Office Ringer to the target network.
5. From a system on the same network as the Office Ringer, open a browser with the new IP
address of the Office Ringer.
Table 2-8. Network Configuration Parameters
Web Page Item
Description
IP Addressing
Select either
DHCP
IP Addressing
or
Static IP
Addressing
by marking the appropriate radio button. If you select
Static
,
configure the remaining parameters indicated in
. If
you select
DHCP
.
Network Settings
IP Address
Enter the Static IP address.
Subnet Mask
Enter the Subnet Mask address.
Default Gateway
Enter the Default Gateway address.
DNS Server 1
Enter the DNS Server 1 address.
DNS Server 2
Enter the DNS Server 2 address.
Current Network
Settings
Shows the current network settings.
IP Address
Shows the current Static IP address.
Subnet Mask
Shows the current Subnet Mask address.
Default Gateway
Shows the current Default Gateway address.
DNS Server 1
Shows the current DNS Server 1 address.
DNS Server 2
Shows the current DNS Server 2 address.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.