Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
7
2.2 Office Ringer Setup
2.2.1 Office Ringer Connections
shows the pin connections on the J3 (terminal block). This terminal block can accept 16
AWG gauge wire.
Note
As an alternative to using PoE power, you can supply 5 VDC at 1000 mA into the terminal
block.
Figure 2-1. Office Ringer Connections
1
2
3
4
5
6
Accept 16 AWG Gauge Wire
J3
Terminal Block
Alternate Power Input:
1 = +5V at 1000 mA
2 = Power Ground
Relay Contact:
(1A at 30 VDC for Continuous Loads)
3 = Normally Open Common
4 = Normally Open Contact
5 = Door Sense Input
6 = Door Sense Ground Reference
3
4
