Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
15
2.2.7 Restore the Factory Default Settings
2.2.7.1 RTFM Switch
When the Office Ringer is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch (
) to set the factory default settings.
Note
Each Office Ringer is delivered with factory set default values.
Note
The Office Ringer will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Figure 2-9. RTFM Switch
To set the factory default settings:
1. Press and hold the
RTFM
switch for more than five seconds.
2. The Office Ringer announces that it is restoring the factory default settings.
Note
The Office Ringer will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
2.2.8 Adjust the Volume
You can adjust the volume through the
setting on the
