Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
22
3. After changing the parameters, click the
Save
button.
DTMF Activation Duration (in seconds)
Type the desired DTMF activation duration (in seconds)
(1 character limit).
NOTE
: A DTMF activation duration of
0
will toggle the
relay indefinitely or until the activation code is sent again
Activate Relay During Ring
When selected, the relay will be activated for as long as
the call is active.
NOTE
: When the phone is set to
Auto Answer
, it will
not ring and this option does nothing.
Activate Relay During Office Ring
Check this box to activate the relay for as long as a Office
Ring tone is ringing.
Activate Relay While Call Active
When selected, the relay will be activated for as long as
the call is active.
Miscellaneous Settings
Auto-Answer Incoming Calls
When selected, the device will automatically answer
incoming calls.
When
Auto Answer
is Off, the device will play a
ringtone through the Office Ringer speaker until someone
presses the button.
Play Ringback Tone
When selected, you will hear a ringback tone while making
a call.
Volume Boost
When
Volume Boost
is enabled, the device will play at a
higher volume at the risk of having the audio clip at very
high levels.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Test Audio
button to do an audio test.
When the
Test Audio
button is pressed, you will hear
a voice message for testing the device audio quality and
volume.
Click on the
Test Relay
button to do a relay test.
Click on the
Reboot
button to reboot the system.
Table 2-7. Device Configuration Parameters (continued)
Web Page Item
Description
