Operations Guide
931281I
CyberData Corporation
2.2.19 Confirm Operation
After connecting the device to the 802.3af compliant ethernet hub, use the LEDs on the device to
confirm that the device is operational and linked to the network.
LED
Color
Function
Power (PWR)
BLUE
/
GREEN
The 802.3at power injector that is provided with the device should
cause the
Power (PWR)
LED to illuminate
BLUE
to indicate that high
power is available.
The
Power (PWR)
LED may illuminate
GREEN
if a low power mode
(802.3af) power source is used (not included and sold separately).
Status
GREEN
After supplying power to the device, a steady
GREEN
Status
LED
illuminates.
After about 20 seconds, the
GREEN
Status
LED will blink fast to
indicate that the device is acquiring an IP address and attempting to
autoprovision. The
GREEN
Status
LED will turn off thereafter until
the device has finished booting. When the device has fully booted,
the
GREEN
Status
LED will turn on solid to confirm the device is
operational.
The
GREEN
Status
LED will blink during a page when it is online.
Speed (SPD)
AMBER
The
Speed (SPD)
LED illuminates
AMBER
for a 100Mb link or is off
for 10MB when the network link to the device is established.
Link/Activity (Link/Act.)
GREEN
The
Link/Activity (Link/Act.)
GREEN
LED blinks to indicate
network traffic.
Figure 2-25. InformaCast Enabled Loudspeaker Amplifier (AC-Powered) LEDs
Table 2-7. InformaCast Enabled Loudspeaker Amplifier (AC-Powered) LEDs
SPD
PWR
Link/Act
Status
Volume
Power (PWR)
LED
(
BLUE
/GREEN
)
Speed (SPD)
LED
(
AMBER
)
Link/Activity (Link/Act.)
LED
(
GREEN
)
Status LED
(
GREEN
)
Summary of Contents for InformaCast Enabled 011406
Page 80: ...Operations Guide 931281I CyberData Corporation Figure 2 41 SSL Configuration Page ...
Page 81: ...Operations Guide 931281I CyberData Corporation Figure 2 42 SSL Configuration Page ...
Page 90: ...Operations Guide 931281I CyberData Corporation Figure 2 47 Audiofiles Page ...
Page 91: ...Operations Guide 931281I CyberData Corporation Figure 2 48 Audiofiles Page ...
